Robust and ultra-rugged vehicle and heavy equipment tracking device with inputs/outputs for fleet management, equipment monitoring on LoRaWAN® networks
- High-precision GPS/GLONASS tracking device
- Weatherproof and ultra-rugged IP67 Housing
- Internal Backup Battery in case of loss of power or tampering
- 1 x Analog Inputs, 2 x Digital Inputs, 1 x Switched Ground Digital Output, 1 x Ignition Digital Input
- On-device Odometer Readings
|Highly sensitive radio receiver is available in 868 or 902 – 928MHz versions for global LoRaWAN® connectivity.
|Concurrent GPS / GLONASS
|72 Channel High Sensitivity Receiver
|-167dBm tracking performance
|~2.0m CEP, 50%, 24 hours static, GPS, SBAS, -130dBm, > 6SVs
|Low Noise Amplifier
|GPS signals are boosted by a unique low-noise amplifier (LNA) allowing operation where other units fail
|LoRaWAN Gateway Geolocation Fallback
|LoRaWAN gateway geolocation fallback when there is no GNSS
|8-36V DC (max)
|Built-in self-resetting fuse makes installation simple and safe. Stringent automotive power “load dump” tests are conducted to ensure operation in the harshest electrical systems.
|~25/50mA when moving
~150mA battery charging
|1100mAh LiPo internal backup battery pack
MECHANICS / DESIGN
|126 x 80 x 27 mm (4.96 x 3.15 x 1.06″)
|171 g (6.03 oz)
|Ultra-Rugged Nylon Glass
|IP67 rated housing ensures device can withstand fine dust, high-pressure spray, submersion for 30 mins in 1m of water, and extreme temperatures.
|7 wire harness
|-20°C to +60°C
|3-Axis Accelerometer to detect movement
|Diagnostic LED signifies operation status
|1 x 0-30V Analog Input,
Auto Ranging, 12-bit ADC
0-5V range: 1.22mV precision
0-30V range: 7.32mV precision
|2 x Digital Inputs with configurable pull-up/down
0-48V DC input range
Pull-up enabled: low at 0.8V, high at 1.0V
Pull-down enabled: low at 2.0V, high at 2.4V
|1 x Switched Ground Digital Output
Can be toggled via downlink.
|1 x dedicated ignition Digital Input 0-48V DC
5V on/off threshold
|The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
|Run Hour Monitoring
|Calculate run hours and distance traveled (odometer) to understand and optimize asset utilization
|Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application.
|Manage device firmware updates and parameters via DM-Link provisioning tool. Some parameters can be changed via downlink.
|Easy integration with comprehensive documentation and a flexible and open payload format
|LoRaWAN® networks use AES-128 Encryption so your data is protected
|Two-year manufacturer’s warranty. Exclusions apply.
|Please contact us for a full list of compliance specifications and documentation for your region.
*Positioning accuracy specifications are provided by the GNSS supplier and reflect ideal conditions. Device configuration, installation, environmental conditions, augmentation services, and many other factors may lead to variations in positioning accuracy.